MRS-series, positive clamping cylinders

  • Ideal for palletized applications
  • Heavy disk springs maintain the clamping force - hydraulic pressure is used for release
  • Single-acting design allows easy setup of hydraulic system
  • Hollow plunger design allows easy retrofit for mechanical clamping
  • Custom buttons can be fitted into the plunger for clamping directly against a workpiece
  • Threaded body allows easy cylinders mounting directly into fixture plate
  • Internal threaded plunger allows accessories to be used easily for retrofit applications

 

Cylinder Capacity at 350 bar Effective Clamping Stroke Model Number Required Operating
Pressure *
 Max Tensioning Stroke Oil Capacity Collapsed Height Outside Diameter
kN mm bar mm cm3 mm mm
8,6 2,2 MRS-1 350 2,2 0,8 82,5 M36 x 1,5
22,5 2,2 MRS-2 350 2,2 1,7 87,8 M48 x 1,5
45,9 2,2 MRS-5 350 2,2 3,2 122,8 M60 x 2
8,5 2,5 MRS-1001 140 5,0 3,5 57,0 M65 x 1,5
16,5 2,5 MRS-2001 185 5,0 4,7 60,0 M80 x 2
26,0 2,5 MRS-3001 180 5,0 7,9 69,0 M95 x 2
38,0 3,0 MRS-5001 235 5,5 8,7 90,5 M95 x 2

* Minimum operating pressure to fully retract the plunger.
Note: Seal material Buna-N, Polyurethane.