SL-series, lower flange models swing cylinders

  • No fixture hole required – cylinder can be bolted directly to fixture
  • Flexible design allows for manifold or threaded port connection
  • Easiest mounting preparation in the swing cylinder line
  • Symmetrical rectangular flange design enables clamping at three sides of the cylinder
  • Allows extra large parts to be clamped

 

Clamp
Force 1)		 Stroke Left *
Turning
Model
Number		 Right *
Turning
Model
Number		 Cyl.
Type		 Effective
Area		 Max.
Oil Flow 1)		 Clamp
Arms 1)
kN mm cm2 l/min
Clamp Total S/A D/A Clamp Unclamp Standard Long
2,1 8,0 16,5 SLLS-22 SLRS-22 • – 0,77 – 0,2 CAS-22 CAL-22
4,9 10,0 22,6 SLLS-52 SLRS-52 • – 1,81 – 0,4 CAS-52 CAL-52
8,0 12,0 22,1 SLLS-92 SLRS-92 • – 3,16 – 1,0 CAS-92 CAL-92
10,7 13,0 28,4 SLLS-121 SLRS-121 • – 4,06 – 1,6 CAS-121 CAL-122
17,4 14,0 27,9 SLLS-202 SLRS-202 • – 7,10 – 2,3 CAS-202 CAL-202
33,1 16,0 30,0 SLLS-352 SLRS-352 • – 12,39 – 3,9 CAS-352 CAL-352
2,2 8,0 16,5 SLLD-22 SLRD-22 – • 0,77 1,55 0,2 CAS-22 CAL-22
5,6 10,0 22,6 SLLD-52 SLRD-52 – • 1,81 3,81 0,4 CAS-52 CAL-52
9,0 12,0 22,1 SLLD-92 SLRD-92 – • 3,16 8,06 1,0 CAS-92 CAL-92
11,6 13,0 28,4 SLLD-121 SLRD-121 – • 4,06 7,94 1,6 CAS-121 CAL-122
18,7 14,0 27,9 SLLD-202 SLRD-202 – • 7,10 15,16 2,3 CAS-202 CAL-202
33,8 16,0 30,0 SLLD-352 SLRD-352 – • 12,39 23,74 3,9 CAS-352 CAL-352

1) Clamp force with standard clamp arm. Clamp arms are sold separately.
Clamp forces for single-acting models are reduced in order to overcome return spring force.
* For models with straight plunger movement, replace L or R with S. Example: SLSD-92.