Anmelden

Wagen

Home / Anwendungen

Produkte Filtern

Stromerzeugung

Applications

Enerpac has gained unique expertise in delivering hydraulic solutions for the controlled movement and positioning of structures.

Generator Installation at the Owen Springs Power Station

Generatorinstallation im Kraftwerk von Owen Springs

Generatorinstallation im Kraftwerk von Owen Springs

Climbing system lifts U2 concert stage

Steigsystem hebt U2-Konzertbühne

Das belgische Unternehmen Stageco hat drei gigantische identische Bühnen für die aktuelle U2 360°-Tour erstellt. Was dieses Projekt so besonders macht, ist die Tatsache, dass Hochdruck-Hydraulikzylinder zum ersten Mal überhaupt verwendet werden, um die 230-Tonnen-Konstruktion – auch „die Klaue“ genannt – zusammenzubauen und zu zerlegen. Zusammen mit Enerpac hat Stageco ein einzigartiges System entwickelt, das auf dem synchronen Hebesystem von Enerpac basiert, um die modulare Konstruktion schnell und sicher auf eine Höhe von 30 Metern zu heben.

Releasing Shackle Pins on a Lifting Frame with a Battery-powered Hydraulic Pump and Cylinder

Releasing Shackle Pins on a Lifting Frame with a Battery-powered Hydraulic Pump and Cylinder

Releasing Shackle Pins on a Lifting Frame with a Battery-powered Hydraulic Pump and Cylinder

Safely Erecting a Bridge Over Water with a Hydraulic Driven Launching Nose

Safely Erecting a Bridge Over Water with a Hydraulic Driven Launching Nose

The KiwiRail project by Downer, completed this year, will permanently improve the country’s main trunk rail network and allow more freight to be carried over strongly refurbished structures to busy destinations including ports and intermodal facilities.

Removing the Spans of the old Bay Bridge in Record Time

Removing the Spans of the old Bay Bridge in Record Time

The San Francisco-Oakland Bay Bridge spans San Francisco Bay in California. As part of Interstate 80 and the direct road between San Francisco and Oakland, it carries about 270,000 vehicles a day on its two decks, and has one of the longest spans in the United States.

SyncHoist Lifts and Positions Brisbane Riverwalk Concrete Girders

SyncHoist Lifts and Positions Brisbane Riverwalk Concrete Girders

Building a 850m pedestrian riverwalk required pre-cast concrete girders weighing 385 tons to be lifted and positioned into place.

Lifting a Reclaimer Stacker for Bearing Replacement

Lifting a Reclaimer Stacker for Bearing Replacement

The main bearing on a Bardella iron ore reclaimer stacker needed to be replaced. Safely replacing the bearing without injury or damaging the stacker required lifting the 470 metric ton stacker approximately 400 mm (15.74 inches) while maintaining the machine’s center of gravity.

Bridges Installed Over Railway Without Disrupting Services

Bridges Installed Over Railway Without Disrupting Services

The Rhine-Ruhr Express (RRX) route was being upgraded to reduce delays caused by long distance, regional and freight transport sharing the same tracks.

Hydraulics play key role in the Installation of Venice MOSE Caissons

Hydraulics play key role in the Installation of Venice MOSE Caissons

Over the last 100 years, the city of Venice has sunk 23 cm while sea levels have risen. In recent years the frequency and intensity of flooding has increased causing significant damage. The MOSE project is intended to protect the city from flooding. The project includes the installation of multiple underwater caissons with mobile gates that can be raised to prevent water from the sea from entering the lagoon.

Hydraulic Jacking System Assists Construction of the Honolulu Rail Transit System

Hydraulic Jacking System Assists Construction of the Honolulu Rail Transit System

In 2012, the Honolulu Rail Transit Project began the construction of a 20-mile elevated rail line. The rail system seeks to alleviate significant traffic issues affecting Hawaii’s most congested city. Kiewit was tasked with the design and construction of the elevated rail guideway. In order to accelerate the construction timeline and maintain a high-level of quality, Kiewit selected a segmental precast span-by-span construction technique to complete the project.

Lifting and Rotating Suspended Loads with a Strand Jack Gantry with Rotation Unit

Lifting and Rotating Suspended Loads with a Strand Jack Gantry with Rotation Unit

One of the many challenges for logistics companies in the power generation sector is installation of new equipment. Loads are typically transported on trailers positioned parallel to the power plant, however, the equipment needs to be lifted and installed perpendicular to the trailer.

Strand Jacks Smart Cylinder Control System Enable Safe and Synchronous Lowering of Shaft Lining for Underground Mine

Strand Jacks Smart Cylinder Control System Enable Safe and Synchronous Lowering of Shaft Lining for Underground Mine

The proper installation of shaft lining is crucial to the safety of mine workers.