PASG3002SB, Turbo II Air Hydraulic Pump, Mount for Single DO3 Valve, 2,46 l/min Oil Flow at 7 bar
PASG3002SB, Turbo II Air Hydraulic Pump, Mount for Single DO3 Valve, 2,46 l/min Oil Flow at 7 bar
Enerpac PASG Air Hydraulic Pumps are designed for intermittent to medium duty workholding applications up to 5,000 psi. Each pump includes a single mount for a DO3 valve.
Enerpac Turbo II Air Over Hydraulic Pumps generate the hydraulic pressure you need using the air pressure you have available. The Air Saver Piston reduces air consumption, and the pump can start at low pressures from 50-125 psi.
Turbo II Air-Hydraulic Pumps are best suited to medium or lower cycle applications. They provide all the power and speed needed for simple clamping circuits and mostly single acting tools. At only 75 dBA, the Turbo II Series helps to keep the noise level to a minimum.
Turbo II Air Over Hydraulic Pump Series:
- PATG - Treadle for foot or hand operation
- PARG - Pendant Operation
- PAMG - Manual lever operated. For double-acting applications
- PACG - For remote valve mount. For work holding, 5000 psi (350 bar).
- PASG - Includes mount for a single DO3 Valve.
Series: PASG | Product Line: Workholding Tools
Enerpac PASG Air Hydraulic Pumps are designed for intermittent to medium duty workholding applications up to 5,000 psi. Each pump includes a single mount for a DO3 valve.
Enerpac Turbo II Air Over Hydraulic Pumps generate the hydraulic pressure you need using the air pressure you have available. The Air Saver Piston reduces air consumption, and the pump can start at low pressures from 50-125 psi.
Turbo II Air-Hydraulic Pumps are best suited to medium or lower cycle applications. They provide all the power and speed needed for simple clamping circuits and mostly single acting tools. At only 75 dBA, the Turbo II Series helps to keep the noise level to a minimum.
Turbo II Air Over Hydraulic Pump Series:
- PATG - Treadle for foot or hand operation
- PARG - Pendant Operation
- PAMG - Manual lever operated. For double-acting applications
- PACG - For remote valve mount. For work holding, 5000 psi (350 bar).
- PASG - Includes mount for a single DO3 Valve.
- Turbo II air hydraulic pumps generate the hydraulic pressure you need using the air pressure you have available. The Air Saver Piston reduces air consumption and operating costs.
- They are ideal for providing the power and speed desired in simple clamping circuits. Turbo II airhydraulic pumps are best suited to medium and lower cycle applications. At only 75 dBA, the Turbo II series helps to keep noise level to a minimum.
- On-demand stall-restart operation maintains system pressure, providing clamping security
- External adjustable pressure relief valve (behind sight glass)
- Internal pressure relief valve provides overload protection
- Reduced noise level to 75 dBA
- Operating air pressure: 4-8,5 bar - enables pump to start at low air pressure**
- Reinforced heavy-duty lightweight reservoir for applications in tough environments
- Five valve mounting options provide flexibility in setup and operation
- Fully serviceable air motor assembly
- Momentary or continuous air inlet treadle
- Requires user supplied valve - suitable for mounting any single- or double-acting valve with a D03 mounting configuration
- Available with multiple valve manifold (7,5 litre only)
- **Note - From 4-8,5 bar air inlet pressure. Performance is significantly diminished below 4 bar. Performance may vary compared to listed values due to seal friction, internal pressure drops and manufacturing tolerances. Be sure to allow some flexibility on air inlet pressure.